Maintenance And Care; Contact Information - Eufab BIKE TWO Bedienungsanleitung

5.3 MOUNTING THE BICYCLES TO THE RACK
The fi rst bicycle is placed in the fi rst bicycle rail (closest to the vehicle) and
secured to the U-shaped bracket using the short frame holder. The wheels
are secured by pushing the stoppers up to the wheel and securing with the
straps.
CAUTION
The front wheel must also be secured with a small
tensioning strap to prevent it from turning.
The second bicycle is placed in the second rail, facing the opposite
direction and secured to the U-shaped bracket with the short frame holder.
The wheels are secured in the same way as for the fi rst bicycle. It may be
necessary to arrange the individual bicycles diff erently on the rack to ensure
that the frame holders may be correctly secured. Now secure the bicycles
with the long safety strap. Wrap the safety strap through the bicycle frames
and the U-shaped bracket and tighten. Disassemble in reverse order.
The bicycle rack may not be used without this safety
strap.
Safety strap
5.3.1 TRANSPORT OF E BIKES
When transporting e-bikes, the payload of the
bicycle carrier and the maximum load capacity of each
individual bicycle rail must not be exceeded.
Maximum load capacity of the Maximum load capacity of the
bicycle rails:
rail 1: 25.0 kg
rail 2: 20.0 kg
1
2
Load the bike carrier so that the maximum payload is not exceeded. See
section 3. Specifi cations.
10
If you transport an e-bike on rail 1, the other bike must be
lighter so that the bike rack is not overloaded. Place the bike
rack in front of the
Load the weight of each bicycle fi rmly (e.g. with a personal
scale).

6. MAINTENANCE AND CARE

• After use, store the bicycle rack in a clean and dry place. Wash any mud or
other dirt off using water.
• Keep the rack tow bar clean and free of grease.
• Check the bicycle rack regularly for damages. Damaged or worn parts must
be replaced immediately. Only original replacement parts may be used.
• Check the bolts and nuts of the bicycle rack regularly and tighten when
necessary.
• Immediately treat any damage to paintwork with paint.
• Regularly lubricate rotating and moving parts.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Due to its lighting system, the bicycle carrier is an electrical
device.
Do not dispose of electrical appliances in household waste!
Discarded electrical and electronic equipment must be col-
lected separately and recycled in an environmentally sound
manner.
Contact your municipal or city government on how to dispose
of old electronic equipment.
The materials are recyclable. You are making an important
contribution to protecting our environment through recycling,
material recycling or other forms of re-utilising old appliances!
Dispose of the bicycle rack in accordance with the laws and
conditions in your country.

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com