Herunterladen Diese Seite drucken

Folding The Bicycle Rack Up; Maintenance And Care; Tips And Tricks; Pin Assignment Of The 13-Pin Connector - Eufab AMBER 4 Bedienungsanleitung

Fahrradträger für anhängerkupplung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

5.6 FOLDING THE BICYCLE RACK UP

Raising the rack platform engages it back into the transport position (you will
hear a click). Secure the folding mechanism again by pushing the locking bolt
down and pulling the handle towards you.
The bicycle rack may not be used without this safety
mechanism.

6. MAINTENANCE AND CARE

• After use, store the bicycle rack in a clean and dry place. Wash any mud or
other dirt off using water.
• Keep the trailer coupling clean and free of grease
• Keep the rack tow bar clean and free of grease.
• Check the bicycle rack regularly for damages. Damaged or worn parts must
be replaced immediately. Only original replacement parts may be used.
• Check the bolts and nuts of the bicycle rack regularly and tighten when
necessary.
• Immediately treat any damage to paintwork with paint.
• Regularly lubricate rotating and moving parts.
12
1
2
3

7. TIPS AND TRICKS

7.1 PIN ASSIGNMENT OF THE 13-PIN CONNECTOR

Left indicator
Rear fog light
Ground for contact 1 - 8
Right indicator
Right-hand tail light
(incl. marker light)
Brake light
Left-hand tail light
(incl. marker light)
Reversing light
Steady current (steady plus)
Charging cable
Charging cable -/ ground
(for battery in trailer)
Control cable for trailer identifi cation
(connection)
against ground pin 3 in trailer
Ground for contact (power supply)
Plug
58L
L
54
54G
R
58R
31
31

8. CHANGING THE BULBS

Required tools: Screwdriver of PH1 size. Unscrew the cross-head screws of the
lens and remove the lens. Press the bulb to be replaced lightly into the socket
and then turn it a quarter of a turn. Now remove the bulb from the socket.
Insert the new bulb in the appropriate position.
List of bulbs:
Brake light/ Rear light:
12 V 21/5 W BAY15d
Indicator:
12 V 21W
Rear fog light:
12 V 21W
Reverse light:
12 V 21W
Licence plate illumination: 12 V 5W
Pin 1, L
yellow
Pin 2, 54G
blue
Pin 3, 31
white
Pin 4, R
green
Pin 5, 58R
brown
Pin 6, 54
red
Pin 7, 58L
black
Pin 8
grey
Pin 9 not used
brown/blue
Pin 10 not used
brown/red
Pin 11 not used
Pin 12
Pin 13 not used
white/black
Socket
58L
L
54
54G
R
58R
31
31
BAU15S orange
BA15S
BA15S
SV8,5 11 x 38 (Soffi t)

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

11556