Cleanmaxx Z 06025 Gebrauchsanleitung Seite 33

Set up the charging station
28
27
ATTENTION!
• Do not leave the mains adapter connected for a prolonged period of time.
After every charge operation, disconnect it from the mains unless you have
confi gured the timer to automatically start the device.
• Keep the charging station and device away from radiators, other heat sourc-
es and direct sunlight.
• The charging contacts on the device and on the charging station should
always be free of dust and clean so that the rechargeable battery can be
charged. Therefore, wipe it off regularly with a soft, dry cloth.
1. Place the charging station on a clean, level fl oor with the back towards a wall
near a socket. When selecting the location, keep in mind that once it has
fi nished cleaning, the robotic vacuum cleaner must have an unobstructed
path back to the charging station. There must be approx. 1.5 to 2 m of
free space in front of the charging station; there should be no furniture
or other obstacles within this space. The sensors (28) must not be covered.
No refl ective objects (e.g. mirrors) should be behind or next to the charging
station as they could confuse the infrared sensor.
2. Connect the mains adapter cord to the charging station and then insert the
mains plug of the mains adapter into an easily accessible socket. Make sure
that none of the leftover cord is located in front of the charging station
so that the device is not obstructed when docking and that the cord does not
pose a tripping hazard!
Charge the rechargeable battery
– Do not charge the device's rechargeable battery (14) in dirty or moist
areas; make sure that the room temperature is between 15 ºC and 35 ºC.
33
25
25 Indicator light
26 Connection for the mains
plug
27 Charging contacts
28 Sensors
26
EN