Use - Cleanmaxx Z 06025 Gebrauchsanleitung

EN
4. Use the
Timer function
– You must fi rst set the current time before you can set the timer for the
device.
– If you do not deactivate the timer and the device is in standby mode, it
will always start cleaning at the set time.
You can program the charging station so that the robotic vacuum cleaner starts
vacuuming at a desired time. Make sure that you select the desired vacuuming
mode before you set the timer.
1. To set a timer, simultaneously push the buttons
standby mode.
2. The hour indicator for setting the timer will start fl ashing. Push the buttons
(+1 hour) or
3. Push the
(+1 minute) or
4. Use the
5. The indicator
6. To deactivate the timer function, simultaneously push the buttons
(22,24) in standby mode. The hour indicator for setting the timer will start
fl ashing. In this mode, simultaneously push the buttons
The indicator

Use

Preparing the room
ATTENTION!
• When using the device in a room for the fi rst time, watch it so that you can
remove any obstacles; this will ensure that the device is able to effectively
clean the whole room.
• The device is not suitable for plush/deep-pile carpets.
• Clear up all items lying around the room that could catch in the brushes or
nozzle or which could obstruct the device while cleaning. Be particularly
sure to not leave any plastic bags on the fl oor.
button to confi rm the set time.
(-1 hour) (23, 24) to set the hours.
button again. You can now set the minutes with the buttons
(-1 minute).
button to confi rm the set time.
will now appear on the display.
on the display will disappear and the timer is deactivated.
• Make sure that the device is not able to come into
contact with cables, cords or tassels, e.g. of curtains,
table cloths or carpets. If necessary, fold the edges
of carpets with tassels under the carpet.
36
and (22,24) in
and
and again.