Control Panel Display - Yum Asia Bamboo YUM IH152 Bedienungsanleitung

2.2

CONTROL PANEL DISPLAY

Press and hold the 'START' touch button for 2 seconds to activate the cooking
program which you have previously selected with the touch button 'MENU'.
Press the 'CANCEL' touch button to cancel the cooking programme. Bamboo will
then go to standby mode with the display flashing. This button also doubles as an
on/off button by pressing and holding longer than 2 seconds when Bamboo in
standby mode.
Press this touch button to select 1 of 10 automatic cooking programmes, 6 of which
are dedicated rice cooking programmes, each successive press of the button moves
through the menu and the selected programme flashes on the display.
This touch button is for the quick rice cooking programme and is only for white rice, it
cannot be used for brown rice
If the unit is in stand-by mode (i.e. no programme is in use) pressing and holding the
'KEEP WARM' button for 2 seconds activates KEEP WARM mode and the 'KEEP
WARM' button lights up. A count-up clock appears for your reference and the 'KEEP
WARM' button stays lit.
The 'PRESET' function allows you to set a timer for delayed cooking of up to 24 hours.
Beware of setting this for too long in the future if there are perishable foods among
the contents of the dish you are cooking.
For adjusting the cooking times for non-rice cooking menu settings and the preset
function. Pressing one of these buttons when a programme has been selected allows
you to adjust the cooking time. Default cooking times are listed under the specific
manual sections for different programmes.
Bamboo IH Multifunction Rice Cooker by Yum Asia
7