Using The Programmes - Silvercrest SHFD 1400 B2 Bedienungsanleitung

NOTE
You can press and hold the
►
the values quickly.
3) Start the cooking process, if you have not already done so, by briefly
pressing the Start/Stop button
The fan symbol
selected programme flash simultaneously. The appliance starts to
heat up.

7.3 Using the programmes

The appliance has 8 preset cooking programmes. When you select
one of the programmes, the corresponding programme symbol lights
up in the upper section of the control panel 1. The preset temperature
and cooking time are shown on the display z. You can change these
settings depending on the recipe or your own needs, as described in the
previous section.
How to set a programme:
1) Press the On/Off button
The control symbols in the lower section of the control panel 1 light
up.
2) Press the programme selection button
symbol for the desired programme lights up in the upper section
of the control panel 1.
The preset temperature and cooking time for this programme are
shown alternately on the display z.
NOTE
The temperature and cooking time appear alternately every
►
5 seconds on the display z. To switch between temperature
and cooking time more quickly, press the
3) If necessary, adjust the temperature and cooking time using the
or
4) Press the Start/Stop button
The fan symbol
selected programme flash simultaneously. The appliance starts to
heat up.
│ GB │ MT
■ 116
q on the control panel and the symbol of the
a buttons to suit your requirements.
q on the control panel and the symbol of the
o or a buttons to scroll through
p.
i if the appliance is in standby mode.
u repeatedly until the
button s.
p.
o
SHFD 1400 B2