Herunterladen Inhalt Inhalt Diese Seite drucken

General.description; Survey; Functional Description; Extent Of The Delivery - FLORABEST FRT 450 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für FRT 450 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

General description
The illustrations are on the
front fold-out page.

Survey

1 Upper handle
2 ON / OFF switch
3 Power cable
4 Strain relief
5 Screw sleeve to adjust the
length
6 Telescopic tube
7 Motor head
8 Two-part protection cover
9 Cutting head with line spool
10 Spacing bow (flower protection)
11 Knurled nut and screw
12 Additional handle
13 Line cutter
14 Locking button
15 String spool

Functional description

The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
lines rotating parallel with ground level.
An additional chassis facilitates edge trim-
ming. A hood covering the cutting device
protects the user.
The following describes the functions of
the operating parts.

Extent of the delivery

Carefully unpack the trimmer and check
that it is complete:
Lawn trimmer
Two-part protection cover
3 cross recessed screws
Spacing bow (flower protection)
Additional handle with screw
1 replacement string spool
Assembling instructions
Always disconnect the plug be-
fore working on the trimmer and
wait until the cutting lines have
completely stopped. There is the
danger of electric shock and the
possibility of injury by the cutting
lines.
. Only.use.original.parts.and.
always.observe.the.line.cutter.
during.assembly.work.as.the.
line.cutter.(
ries.injury!
You can assemble the protection
cover with or without a spacer.
.. . Adding.the.spacer.(optional):
1. Insert the spacer (10) into the
guide provided on the motor
head (7).
. . Assembling.the.protection.
cover:
2. Fold the grey part of the protec-
tion cover (8) downwards (see
small Fig).
3. Apply the protection cover (8) to
the motor head (7) (see applica-
tion position
Ensure that the cutting strings
are not clamped in.
4. Secure the protection cover (8)
with the 3 cross recessed screws
included in delivery.
GB
13).can.cause.se-
).
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis