Heater Dimensions, Fitting Measurements - AEG WSP 300 H Gebrauchs- Und Montageanweisung

2.2.4 Heater dimensions, fitting measurements

The Kitchen Heater is designed to be built in below the working top. The heater's height is factory-
set at 815 - 820 mm.
Note: When measuring the height of the heater location recess, make sure that there is a
minimum clearance of 8mm between the cover plate of the heater and the
underside of the working top!
Dimensions of the heater location recess (nominal dimensions):
- Height: 825 mm
- Width: 450 mm
- Depth: 570 mm (positioned flush to wall)
Fig. 3
a) Accessories
(cover plate, front panel, side fascia plates)
b) Factory supplied:
1 equalising fascia plate 10 mm and 2 equalising fascia plates 20 mm height supplied
c) Plinth cover plate 63 mm continuously adjustable to rear of heater
d) Cover plate front or back, mountable with 30mm overhang
d)
For the Fitter
a)
b)
a)
a)
c)
27