2.2.3 Minimum Clearances
For reasons of safety, the following minimum clearances are to be adhered to:
From cover and side panels
From air-outlet grille
2.2.4 Tilting Safety, Wall Mounting
AEG high line storage heater must be protected against tipping over. To do this, the heater is to be
fixed to the wall.
The heater should first be mounted to the wall as shown in Fig. 1 using the screw and wall-plug
provided. The fixing screw can be threaded through either the left-hand or right-hand inside
panel.
2.2.5 Heater Dimensions
10 cm
25 cm
Fig. 1 Wall Mounting
For the Fitter
23