Names And Functions Of Parts; Front Panel - Teac CD-P750 DAB Bedienungsanleitung

2 – Names and Functions of Parts

Front panel

POWER switch
This turns the unit on and off
CAUTION
Before turning the unit on, lower the volumes of connected
equipment to their minimum levels.
Failure to do so could result in a sudden loud noise that could
harm hearing, for example.
NOTE
Do not turn off the power when the unit is operating (including
dubbing, playing back, or writing data to an SD card or USB
flash drive). Doing so could cause dubbing to fail or dubbed
data to be lost, for example.
Disc slot
Insert a disc here.
After a disc is inserted partway, the unit will automatically draw
it in.
EJECT (-) button
Press to eject a disc. (see "Inserting and removing discs" on
page 18)
Press and hold for at least 10 seconds to force-eject a disc. (see
"Forcing disc ejection" on page 18)
Display
This shows various types of information.
HOME/MENU button
i When the Home Screen is open, press to open the Menu
screen. (see "Menu structure" on page 15) (see "Basic Menu
screen operations" on page 15)
i When the Menu screen is open, press this button to return to
the Home Screen.
MULTI JOG dial
This dial functions as a dial when turned and as a button when
pressed.
Dial functions
i When the current source is CD, USB or SD and the playback
area is set to "All", turn the MULTI JOG dial to skip tracks. (see
"Skipping to earlier and later tracks" on page 21)
i When the current source is USB or SD and the playback area
is folder ( icon shown), turn the MULTI JOG dial to move
among tracks and folders. (see "Folder playback (SD cards and
USB flash drives only)" on page 22)
i When the current source is FM, turn the MULTI JOG dial to
change the received frequency. (see "Tuning in radio stations"
on page 33)
i When the input source is DAB, turn the MULTI JOG dial to start
automatic station selection. (see "Listening to DAB Radio" on
page 31)
i When the current source is DAB/FM and preset mode is
enabled, turn the MULTI JOG dial to move to the previous or
next preset number. (see "Setting radio station presets" on page
33 and "Broadcast station presets" on page 32)
i When a Menu screen is open, turn to select items and change
setting values. (see "Basic Menu screen operations" on
page 15)
i When pressing and holding SHIFT button, turn the MULTI
JOG dial to adjust the display brightness. (see "Adjusting the
display brightness" on page 17)
Button function
i When a Menu Screen is open, press to confirm selections and
settings (ENTER button function).
STOP (8) button
i Press to stop playback.
i When the current source is DAB or FM, press to switch
between frequency and preset modes. (see "Changing the
received frequency" on page 33)
i Press when dubbing to stop. (see "Dubbing procedures" on
page 36)
PLAY (7) button
Press when stopped or in playback standby to start playback.
PAUSE (9) button
Press when stopped or playing back to start playback standby.
m/, [FAST] buttons
i Press and hold these buttons to search backward/forward.
(see "Searching backward and forward" on page 24)
i If the current source is CD, USB or SD and you are searching
backward/forward, press and hold the button for the oppo-
site direction (m or ,) to search at high-speed. (see
"Searching backward and forward" on page 24)
i When the current source is FM, press to automatically search
received frequencies for that frequency mode. (see "Changing
the received frequency" on page 33)
i When the input source is DAB, press to start automatic station
selection.
EN
9