Teac CD-P750 DAB Bedienungsanleitung Seite 11

8 [FM MODE] button
i Press to input track number 8 when the current source is CD,
USB or SD and the playback area is set to "All". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is FM and shift mode is active
(SHIFT indicator lit), press to switch between stereo and
mono for FM broadcast reception. (see "Setting the FM mode"
on page 33)
9 [P.AREA] button
i Press to input track number 9 when the current source is CD,
USB or SD and the playback area is set to "All". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is USB or SD and shift mode is active
(SHIFT indicator lit), press to set the playback area. (see
"Setting the playback area" on page 21)
0 [DUB] button and indicator
i Press to input track number 0 when the current source is CD,
USB or SD and the playback area is set to "All". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a pre-
set station.
i When the current source is CD and playback is stopped or the
current source is DAB/FM, press with shift mode active (SHIFT
indicator lit) to start dubbing (copying) preparation. The indi-
cator lights when the dubbing (copying) function is active.
(see "Dubbing procedures" on page 36)
CLEAR button
i When the current source is CD, USB or SD, press this to clear
values input with number buttons.
i Press to close a warning message that has appeared on the
Home Screen.
i When the current source is FM, press and hold to clear all pre-
set stations for that source. (see "Clearing preset assignments"
on page 34)
SHIFT button and indicator
Press this button to light the indicator and enable shift mode,
which activates the shift functions of other buttons. (These
functions are shown below the buttons with white letters on
dark blue backgrounds.)
To deactivate the shift mode (SHIFT indicator unlit), press the
SHIFT button again.
Using a shift function will deactivate shift mode.
SOURCE button
Press to switch the current source. (see "Selecting the playback
source" on page 19)
DISPLAY/RDS/INFO button
i Press during playback to show a variety of information. (see
"Time and text information display" on page 29)
i Press when the current source is FM to switch the RDS mode.
(see "RDS (Radio Data System)" on page 34)
i When the input source is DAB, press to start automatic sta tion
selection.
BACK [PAIRING] button
i When the Menu screen is open, press to return to the Home
Screen.
i When a Menu setting screen is open, press to go up one
menu level.
i When the current source is USB or SD and the playback area is
folder ( icon shown), press to move up one folder level. (see
"Playback area" on page 21)
i When the current source is BLUETOOTH, press and hold to
activate Bluetooth pairing mode. When a Bluetooth con-
nection is active (Connected shown), press to disconnect
forcefully. (see "Pairing" on page 30)
SD card slot
Insert SD cards in these slots. (see "Inserting and removing SD
cards" on page 18)
USB port
Connect (and disconnect) USB flash drives here. (see
"Connecting and disconnecting USB flash drives" on page 19)
EN
11