Names And Functions Of Parts (Main Unit) - Teac PD-301DAB Bedienungsanleitung

Names and functions of parts (main unit)

A B C
A
Standby/on (¤) button
Press this button to turn the unit on and put it in standby.
When the unit is ON, the ring around the button lights
blue.
o When this unit is in standby mode, it consumes
standby power. For this reason, we use the term
"standby" rather than "off".
B
USB port
Connect a USB flash drive to the unit.
o Do not connect this unit's USB port to a computer
or similar device. Audio from computers cannot be
input through this USB port.
C
Remote control signal receiver
This receives signals from the remote control. When
using the remote control, point the remote control
here.
D
Disc slot
Insert a disc here. After a disc is inserted partway, the
unit will automatically draw it in.
E
Display
This shows a variety of information.
F
Stop (8) button
Press during playback to stop playback.
When the input source is DAB/FM, use to switch
between frequency and preset modes.
G
Skip (.//) buttons
Use to skip to the previous or next track. During play-
back, press and hold to search backward/forward.
D E F
H
Play/pause (7/9) button
Press when stopped or paused to start playback.
Use this button to pause playback during playback.
I
SOURCE button
Use this button to select the input source.
J
Eject (-) button
Press to partially eject the disc. Hold the disc by its
edges and pull it out.
G H I J
9