Dubbing (Copying) Functions; Dubbing Overview; Dubbing Procedures - Teac CD-P750 DAB Bedienungsanleitung

8 – Dubbing (copying) functions
Using the dubbing (copying) functions of this unit, the content of
audio CDs and DAB/FM broadcasts can be copied to SD cards and
USB flash drives. The format used for the files on the dubbing desti-
nation can also be changed.

Dubbing overview

Regardless of the playback mode setting, audio CDs are played
continuously while being dubbed to SD cards and USB flash drives.
This unit can record DAB/FM broadcasts to SD cards and USB flash
drives.
Some dubbing operations might delete existing files.
Dubbing never deletes existing files.
NOTE
This unit cannot simultaneously dub to both an SD card and a
USB flash drive.
Dubbing file formats
This unit can write the following file formats to the dubbing
destination.
o Dubbing from audio CDs
MP3 files (96/128/192/320 kbps)
o Dubbing from DAB/FM radio
MP3 files (96/128/192 kbps)
For details about setting the MP3 file bit rate, see "Make dubbing
format settings" on page 37.
NOTE
When dubbing, a folder named "DUBBING" is created and files
named "RECXXX.mp3" are created for each CD track on the des-
tination. ("XXX" are three-digit numbers such as "001".)
Operation when dubbing
Operation is as follows when the unit is dubbing.
o Actions other than dubbing are not possible.
o While dubbing, the audio of the CD being dubbed is output.
The DUB AutoMute item can be set to ON to stop output. (see
"Muting analog outputs while dubbing" on page 37)
o Playback of SD cards and USB flash drives is not possible while
dubbing.
o Regardless of the playback mode setting, audio CDs are played
continuously while dubbing.
NOTE
i Depending on the SD card or USB flash drive used while dub-
bing, errors could occur if writing cannot keep up with audio
input.
i When copying from an audio CD, silent gaps will occur even
between tracks that sounded continuous on the CD.
i The maximum file size when recording is 2 GB. Dubbing will
end when the file size reaches 2 GB.
Dubbing from content on SD cards and USB flash drives
This unit can only dub from CD and DAB/FM radio sources.
This unit cannot dub from data CDs, SD cards, USB flash drives,
Bluetooth devices or the AUX input.
36
Dubbing to write-protected media
Can not DUB will appear on the Home Screen and dubbing will
not start. Press the CLEAR or STOP (8) button to return to the
previous screen.
Dubbing to media that does not have enough open
space
Media Full will appear on the Home Screen and dubbing will not
start. Press the CLEAR or STOP (8) button to return to the previ-
ous screen. Moreover, if the dubbing destination runs out of space
during dubbing, Media Full will appear on the Home Screen and
dubbing will stop. Press the CLEAR or STOP (8) button to return
to the previous screen.

Dubbing procedures

1.
Load the audio CD or tune in the radio frequency that you
want to dub.
2.
Select the media to copy as the current source (CD, DAB or FM).
(see "Selecting the playback source" on page 19)
3.
When stopped, press the main unit SHIFT button to activate
shift mode (SHIFT indicator lit), and press the 0 [DUB] button
to activate dubbing mode. The remote control DUB button
can also be pressed.
CD
*USB <>
4.
Turn the main unit MULTI JOG dial or use the remote control
.// [l/;] buttons to select the dubbing destination
(USB or SD).
NOTE
i The Home Screen will reopen if nothing is done for five seconds.
i This unit cannot simultaneously dub to both an SD card and a
USB flash drive.
5.
Press the main unit SHIFT button to activate shift mode
(SHIFT indicator lit), and press the main unit 0 [DUB] button
to start dubbing. The remote control DUB button can also be
pressed.
CD ->USB DUBBING
01
NOTE
i If the dubbing destination medium is write-protected, a Can
not DUB message will appear. Press the main unit or remote
control CLEAR button to close the message and return to the
Home Screen.
i If the dubbing destination medium does not have enough
open space, a Media Full message will appear. Press the main
unit or remote control CLEAR button to close the message and
return to the Home Screen. Moreover, if the dubbing destina-
tion runs out of space while dubbing, a Media Full message
will appear and dubbing will stop. Press the main unit or remote
control CLEAR button to close the message and return to the
Home Screen.
DUBBING
SD
00:01