Using The Power-On-Play Function; Using The Resume Function - Teac CD-P750 DAB Bedienungsanleitung

4 – CD/SD/USB playback (continued)

Using the power-on-play function

By using a commercially-available timer, for example, to turn this
unit on, you can make it start playing at a desired time.
1.
Connect the unit to the timer so that it receives power from
the timer power output in advance.
2.
Select the current source for playback. (see "Selecting the play-
back source" on page 19)
3.
Press the main unit SHIFT button to activate shift mode
(SHIFT indicator lit), and press the 2 [P.O.PLAY] to turn on
the power-on-play function. (This is off by default.) The remote
control P.O.PLAY button can also be pressed.
PWR On Play On
4.
With this unit's POWER switch set to on, turn the power off
from the timer, and set the timer to turn on at the desired
time.
The power will turn on at the desired time, and the unit will
automatically start playback.
NOTE
i The P icon appears on the Home Screen when the power-on-
play function is on.
CD
i The power-on-play function on/off setting is retained even
when the unit is turned off.
28
01 00:01
PLAY P
01 00:10

Using the resume function

When the resume playback function is on, playback can restart
from the point where it was last stopped (resume point).
The following actions will clear the resume point.
o The medium is ejected
o The playback area is changed
o The unit is turned off or put into standby when the playback
area is set to folder ( icon shown)
o The playback mode is set to random
o The content of the current source is changed (dubbing function
used)
Use the menu to turn the resume playback function on/off.
1.
Select the Resume Setting item on the Menu screen to open
the Resume Setting screen. (see "Menu operation proce-
dures" on page 15)
Resume Setting
< ON
2.
Turn the resume playback function on or off.
Options: OFF, ON (default)
3.
Confirm the setting and return to the Menu screen.
NOTE
i If there is no resume point (no time has been set as the resume
point), the beginning of the playback track will become the
resume point.
i The resume playback function on/off setting is retained even
when the unit is turned off.
>