Eu Declaration Of Conformity - SIGRIST-PHOTOMETER TurBiScat 2 Ex Kurzanleitung

EU Declaration of Conformity

11 EU Declaration of Conformity
SIGRIST-PHOTOMETER AG
Hofurlistrasse 1
CH-6373 Ennetbürgen, Switzerland
declares under its sole responsibility that the type of instrument TurBiScat 2 Ex complies with the essential re-
quirements of the directives and standards listed below.
Directives
2014/34/EU
2014/30/EU
2014/53/EU
2011/65/EURoHS
Standards
EN IEC 60079-0:2018
IEC 60079-0:2017
EN 60079-1:2014
IEC 60079-1:2014
EN 60079-26:2015
IEC 60079-26:2014
EN 61010-1:2010
EN 61326-1:2013
ETSI EN 301489-1 V2.2.3
ETSI EN 301489-17 V3.2.2
ETSI EN 300328 V2.2.2
EN 60825-1:2014
* only available in English
Certificates
BVS 21 ATEX E 037X
IECEx BVS 21.0043X
The following appointed body has carried out the
conformity assessment procedure according to Di-
rective 2014/34/EU Annex II:
The following appointed body has carried out the
assessment of the module "Production quality as-
surance" according to Directive 2014/34/EU Annex
IV and VII:
Comments
The design, manufacture and testing of the pressure equipment is carried out in accordance with the Pressure
Equipment Directive 2014/68/EU Article 4, Paragraph 3 in line with good engineering practice based on the AD
2000 regulations.
Signed for and on behalf of:
CH-6373 Ennetbürgen, Switzerland
2021-08-31
SIGRIST-PHOTOMETER AG
Equipment and protective systems intended for use in explosion hazard areas
Electromagnetic compatibility
Radio systems
EURoHS Directive
General requirements
General requirements*
Device protection by pressure-proof encapsulation "d"
Flameproof enclosure*
Equipment with equipment protection level (EPL) Ga
Equipment with equipment protection level (EPL) Ga*
Safety requirements for measuring instruments
EMC requirements for measuring devices
EMC for radio equipment- Part 1: Common technical requirements
EMC for radio equipment- Part 17: Broadband data transfer
Broadband transfer systems - data transfer in the 2.4GHz band
Safety of laser equipment
EU Type Examination Certificate
IECEx Certificate of Conformity
DEKRA Testing and Certification GmbH, 0158
Dinnendahlstrasse 9
DE 44809 Bochum, Germany
DEKRA Testing and Certification GmbH, 0158
Dinnendahlstrasse 9
DE 44809 Bochum, Germany
BVS 20 ATEX ZQS/E422
The product includes a class 1 laser. The laser output remains within class 1 (in-
cluding single errors) according to EN 60825-1:2014.
...................................
Marc Achermann, Director R&D
...................................
Markus Stolz, CEO
DE
EN
FR
ES
NL
PT
ZH
RU
CS
JA
IT
PL
29 / 176