SIGRIST-PHOTOMETER TurBiScat 2 Ex Kurzanleitung Seite 28

Decommissioning and disposal / return
Residues of hazardous media
Depending on the area of application, a dismantled device may contain residues of hazardous media. These
residues can endanger persons.
u
Thoroughly clean all surfaces that come into contact with the media.
u Remove all aggressive, toxic or hazardous substances in or on the device, as well as on the associated periph-
eral devices.
u Note the decontamination process on the RMA form and have it confirmed.
Use the original packaging when returning the photometer. If this is not available, observe the following instruc-
tions.
u
Empty the unit completely and dry it.
u Before packaging, seal the openings of the device with tape or pins so that no parts of the packaging units
can penetrate inside.
u The device contains optical and electronic components. Ensure with the packaging that no impact can affect
the device during transport.
u Pack all peripheral devices and accessories separately and label them with the serial number of the photome-
ter. This prevents later confusion and facilitates the identification of the parts.
u
Enclose the completed RMA form and mark the RMA number on the outside of the packaging.
ð Packed in this way, the devices can be transported by all standard freight routes.
28 / 176
DANGER
SIGRIST-PHOTOMETER AG