Operating Elements - SIGRIST-PHOTOMETER TurBiScat 2 Ex Kurzanleitung

Commissioning
Cable strands
Function
4.3 Connection at a distance
With the standard cable (0.2 mm
cross-section must be increased to such an extent that the cable resistance does not exceed 10 ohms.
5 Operation
The device can be operated via the proximity sensor (TOUCH) with the finger directly on the device display or with
WiFi-capable devices.
5.1

Operating elements

You can switch between the different menu items by touching them.
Short touch (<0.5s): navigate between menus
l
Touch for a long time (1...2s): Navigate within a menu
l
For the input to be recognized, the finger must be lifted at least 5 cm after the touch. Without activity, the display
changes to the measurement monitor after one minute.
6 Commissioning
u Ensure that the device is correctly mounted and connected.
u
Connect the service voltage to the device.
ð The start-up display appears (factory setting language is English).
SIGRIST-PHOTOMETER AG
wh/gn
10/100BaseT TX+
POE Mode A DC-
POE Mode B
2
) maximum distances of 100 m are possible. For longer distances, the cable
gn wh/or or
TX- RX+ RX-
DC+
wh/bu bu wh/bn
DC+ DC-
bn
DE
EN
FR
ES
NL
PT
ZH
RU
CS
JA
IT
PL
23 / 176