52002465_F_IM_InPro5000i_edf_2022_09.qxp_52002465_F_IM_InPro5000_edf_2022
8
3
Product description
3.1
General information
The sensor InPro 5000 (i) with integrated temperature
probe is used for dissolved carbon dioxide meas ure -
ment.
The sensor has been designed for accurate and precise
measurement at low to medium carbon dioxide partial
pressure.
The sensor is sterilizable and compatible with CIP
(cleaning in place).
The sensor consists of an exchangeable pH electrode
which is built in a steel shaft and fixed with a small
hexagonal screw.
3.2
Principles of CO
Here is a short summary of the principle of the
potentiometric measurement of CO
sensor is based (Severinghaus). The InPro 5000 (i)
sensor employs a gas permeable silicone membrane
which is tightly stretched around a special engineered
flat pH membrane. The CO
process diffuses across the membrane until its partial
pressure equilibrates within the electrolyte film in front
of the pH sensitive glass and the bulk of the internal
electrolyte.
The dissolved CO
bicarbonate and H
CO
2
The formed H
electrolyte which is measured with the integrated pH
electrode. Thus, the CO
calculated using the pH and the temperature, which is
detected as well.
3.3
Scope of delivery
Each sensor is supplied together with:
– 1 bottle CO
– 1 quality control certificate
– 1 inspection certificate 3.1
(in accordance with EN 10204.3/3.1)
Membrane body and cap sleeve are not mounted.
The interior body is protected against drying out with
a wetting cap, filled with CO
Please check completeness.
InPro 5000 (i)
52 002 465 F
measurement
2
gas reacts with water to form
2
+
ions:
+ H
O
HCO
2
+
ions lead to a pH change of the inner
-electrolyte 25 ml
2
InPro 5000 (i) CO
2
gas from the sample or
2
–
+ H
+
3
partial pressure can be
2
-electrolyte.
2
© 09 / 2022 METTLER TOLEDO
Printed in Switzerland
Sensor 12 mm
which this
2