Introduction; Intended Use; Parts Description; Technical Data - Parkside PESG 120 B2 Originalbetriebsanleitung

Arc welder PESG 120 B2

Introduction

yourself with the product before using it for the first
time. In addition, please carefully refer to the oper-
ating instructions and the safety advice below. Initial
operation of this tool must be performed by trained
personnel.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

This electric welding equipment is suitable for
manual arc welding using the appropriate coated
electrodes. Improper product handling can be dan-
gerous to persons, animals and objects. Only use
the welding shield with welding glass and protec-
tive glass overlay marked accordingly, and only for
welding. The welding shield is not suitable for laser
welding! Only use the product as described and
for the indicated purpose. Keep these instructions in
a safe place. When passing this product on to others,
please also include all the documents. Any use other
than the intended is prohibited and potentially dan-
gerous. Damages resulting from noncompliance or
misuse are not covered by the warranty and are not
included in the manufacturer's liability. This device
has been designed for household use and may not
be used for commercial or industrial purposes.

Parts description

Electric Welding Equipment
Handle
1
ON / OFF switch
2
Hand wheel
3
Earth terminal
4
Electrode holder
5
Overheating control lamp
6
273439_Elektro-Schweissgeraet_PESG 120 B2_content_GB_IE_CY.indd 7
Downloaded from www.Manualslib.com
Congratulations! You have
chosen a high-quality device
from our company. Familiarise
manuals search engine
Introduction / Safety information
Welding shield
Welding shield
7
Handle
8
Brush
9
Protective glass
10

Technical Data

Mains connection:
Max. welding current
and the respective
conventional load voltage: 75 A /
Rated value
of the mains current:
Highest rated value
of the mains current:
Maximum effective
input current:
Rated value of the
no-load voltage:
Protection type:

Scope of delivery

1 Arc welder
1 Welding shield
2 Welding cables
1 Combination wire brush with chipping hammer
1 Instructions for assembly and use

Safety information

Please carefully read the instructions for use and fol-
low the specified notices. Familiarise yourself with the
equipment, its proper use and the safety notices using
these instructions for use. The nameplate contains all the
technical data for this welding equipment, please ob-
tain information on the technical facts of this equipment.
This device may be used by children age 16
years and up, as well as by persons with reduced
physical, sensory or mental capacities or lacking
experience and / or knowledge, so long as they
are supervised or instructed in the safe use of
230 V∼ 50 Hz
21 V-100 A / 22 V
U : 230 V
1
I : 22.5 A
1max
I : 7 A
1eff
U : 48 V
0
IP21S
GB/IE/CY 7
18.01.16 16:37