Package Contents; Parts Description - Parkside PPS 40 B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Introduction
RESIDUAL RISK
Even if you operate the device as intended,
there will be residual risks.
Following hazards may occur in conjunction
with the construction and design of this
plasma cutter:
Eye injuries due to glare,
„
Touching hot parts of the device or
„
workpiece (burn injury),
In case of improper protection risk of
„
accident and fire through sparks and
slag particles,
Harmful emissions from smoke and gases
„
if there is a lack of air or if closed rooms
are insufficiently extracted.
Reduce the residual risk by carefully using
the device as intended and observing all
instruction.
32 GB/IE

• Package contents

1 plasma cutter
1 ground cable with terminal
1 cutting cable incl. cutting torch
1 compressed air hose with Quick-Connect
3 electrodes (1 pre-assembled)
1 set of operating instructions
3 burner sleeves (1 pre-assembled)
1 Removable roller guide

• Parts description

PLEASE NOTE!
f After unpacking the product, please
check that all of the package contents
are present and that the device is in
perfect condition. Do not use the device
if it is defective.
1 Plasma cutter
2 Handle
3 Mains plug
4 Ground terminal
5 Ground terminal plug
6 Plasma burner power plug
7 Plasma burner plug
8 Plasma burner
8a Plasma burner button
8b Nozzle clamping sleeve
8c Burner sleeve
8d Electrode
8e Diffuser
8f Interlock switch
9 Overheat protection indicator lamp
10 Plasma burner power socket
11 Ground terminal connection socket
12 Plasma burner connection socket
13 Current controller
14 Mains indicator lamp
15 Quick connector compressed air hose
16 Compressed air hose