Tool Change; Switching On/Off; Cleaning And Maintenance; Cleaning - Parkside PABS 20-Li E6 Originalbetriebsanleitung

GB IE
Torque adjustment should only be
performed in standstill mode.
Reaching the preset torque limit pro-
duces a noticeable rasping sound.
This sound is caused by the slip clutch.

Tool change

1. Rotate the keyless chuck (2) counter-
clockwise, until the drill chuck aperture
(1) is large enough to accommodate
the tool.
2. Push the tool as far as possible into the
keyless chuck (2).
3. Rotate the chuck clockwise to clamp
the tool firmly.
4. To remove the tool again, rotate the
keyless chuck (2) and pull out the tool.
There is a magnet bit holder (
on the left and right of the housing.
you can attach one bit at a time to
the magnetic bit holder.

Switching on/off

By using the on/off switch (12) you can
progressively control the speed. The longer
you push the on-off button, the higher the
speed.
1. Press the on/off switch (12) to start the
device. The LED work light (10) lights
up during operation.
2. To turn it off, release the on/off switch
(12).
When you move the direction switch
(11) to the middle position, the device
is secured against being switched on.
24
During breaks in work, the device
can be hung from a belt, using the
integral metal clip (
care to ensure that the device is
switched off and secured against
accidental activation.
Cleaning and

maintenance

Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
5). should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or sol-
vents. you may otherwise irreparably
damage the appliance.
Maintenance
The appliance cleaner is maintenance free.
17). Take