Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Carefully turn the shipping bolts (A) out of the appliance one after the other and
remove them (s. fig. below / note the direction of the arrow).
A
4. Insert the four provided caps (C) into the screw holes (s. fig. below).
5. . Keep the shipping bolts and the wrench for future use.
NOTICE! The appliance must not be moved or transported without the
shipping bolts properly inserted. RISK OF DAMAGE!
2.4 Levelling
❖ Allow adequate distance to the floor to avoid vibrations and noise.
❖ If the appliance does not stand horizontally, adjust the adjustable feet by turning
them to the right or left, higher or lower, until the appliance is level.
Please do not place blankets, ropes or piles of objects on the floor near the
appliance. They could generate heat, which may affect the proper functioning of
the appliance.
S
HIPPING BOLTS
~
~
92
Werbung
Inhaltsverzeichnis
Fehlerbehebung
