Installation (Only For Approved Contractors); Power Charge 7000I Preparation - Bosch Power Charge 7000i Bedienungsanleitung

4 Installation
(only for approved contractors)
4.1

Power Charge 7000i preparation

▶ Carefully remove the cover [5] and the cap with the
parking holder [7] from the Power Charge 7000i
( Fig. 25, page 29).
▶ Remove the supply line caps following the suitable
installation location for the Power Charge 7000i.
The installation location C must be weatherproof.
Fig. 30 Supply line from the bottom
Fig. 31 Supply line from the center
Power Charge 7000i – 6721849906 (2022/04)
Fig. 32
This step is optional.
▶ Remove the internal interface connections' cap.
0010044536-001
Fig. 33
0010044537-001

Installation (only for approved contractors)

Supply line from the top
Internal interface connections' cap removal
0010044538-001
0010045337-001
31