Authentication Via Rfid Card; Inspection And Maintenance; Cleaning The Wallbox; Protective Devices - Bosch Power Charge 7000i Bedienungsanleitung

6.1.5 Authentication via RFID card

The Power Charge 7000i has a security mechanism against
unauthorised access through a RFID system.
To teach in the RDFID card:
▶ Open the app.
▶ Start the teach-in mode.
▶ Hold the RFID card in front of the RFID reader within
60 seconds.
Fig. 48 Authentication via RFID card
Status LED
LED display
LED lights up purple
LED lights up green (5 sec.)
beep one time
LED lights up green and beep
once
LED lights up red (5 sec.)
beep 5 times short
Table 5 Status LED
Power Charge 7000i – 6721849906 (2022/04)
HomeCom Easy
ANDROID APP ON
play
0010044563-001
Description
RFID teach-in mode is active.
RFID card has been
successful.
RFID card has been accepted.
RFID card has not been
accepted.
7

Inspection and maintenance

7.1

Cleaning the Wallbox

NOTICE
Possible damage to the appliance!
To prevent any damage to the appliance:
▶ Make sure to no use aggressive cleaning agents
(e.g. petroleum ether, acetone, ethanol or methylated
spirit-based glass cleaner) when cleaning the Wallbox,
particularly the plastic surface.
▶ Make sure to use mild detergent solution (e.g. washing-up
liquid, neutral cleaner) and a soft, dampened cloth for
cleaning.
7.2

Protective devices

The following components (fig. 26, page 29) are protective
devices:
▶ Housing
▶ Charging cable
▶ Protective cover
▶ Charging coupler
NOTICE
Possible damage to the appliance!
To prevent any damage to the appliance:
▶ Make sure to inspect the protective devices before every
charging process.
▶ Make sure to have a qualified electrician to perform the
electrical function tests at regular intervals in compliance
with the national regulations.
Inspection and maintenance
43