Basic Functions; Switching On And Off; General Operation - Renkforce RF-IR-200 Bedienungsanleitung

9. The reception quality is shown in the top left corner of the display (7). The more bars are displayed, the better is
the connection to the network.
d) Basic functions

Switching on and off

1
Keep the button (2) pressed for approx. 2-3 seconds until the display goes on or off.

General operation

2
• Turn the rotary knob (11) to set the volume and use the menu to select functions or change settings/values.
• Press the rotary knob (11) like a regular button to confirm a selection or setting.
• You can navigate a menu by turning the rotary knob (11) or using the arrow buttons
• The Mode button (3) enables you to toggle between various modes. Each time you press this button, the device
switches to the next mode.
• Pressing the button
Functions of other buttons
3
• With the button (12), you can go directly to the Favourites list and save stations or select saved stations.
• Use the number buttons 1-5 (10) to call up the first 5 favourites directly from the Favourites list or save stations
(these buttons perform the same function as the button (12), but they are directly related to the first 5 favourites)
• Briefly pressing the Dim button (6) turns the display (7) on and off; pressing and holding this button opens the
display brightness settings.
• The Sleep button (5) directly opens the sleep timer setup.
• The Skytune Search button (4) enables you to search directly for Internet radio stations.
• The Reset button (17) reboots the radio. Use a pointy object such as an unfolded paper clip to push this button
when the device does not respond to any button presses or when undefined characters appear on the display (7).
44
(8) opens the main menu.
and (9).