Renkforce RF-IR-200 Bedienungsanleitung Seite 60

"PLAYBACK SETUP"
7
Settings for playback sequence during media playback:
"RESUME PLAY OPTIONS"
8
Here you can determine whether the device should resume operation in the last mode before it was switched off or
with the main menu display.
"DIMMER"
9
Here you can set the display behaviour and display brightness.
You can also select this menu item directly using the Dim button (6).
The lower the brightness setting, the longer the battery will last.
• The mode determines whether the display is dimmed (Dim) or not (Normal) after some time of non-use.
• The brightness setting (Level) determines the display brightness for dimmed and non-dimmed status.
"EQ"
10
Enables to call up sound presets for different types of music or your customised settings.
"„BUFFER TIME"
11
Sets the buffer time for the Internet radio playback.
When playing Internet radio stations, the data are temporarily stored in order to avoid dropouts in the event
of a poor data connection or brief interruptions in the data connection. If your Internet reception is poor,
increasing the buffer time can help ensure uninterrupted playback.
"INFORMATION"
12
Here you can retrieve information about your network and Internet radio.
"SOFTWARE UPDATE"
13
Here you can search for software updates in the network and install them if necessary.
"RESET TO DEFAULT"
14
Here you can reset the Internet radio to the factory settings.
Caution, all settings will be deleted.
60