Dab Radio Mode - Renkforce RF-IR-200 Bedienungsanleitung

i) DAB radio mode
For this mode, the antenna (1) must be extended completely. A network connection is not required for this
mode. If no stations can be received or only a few, reorient the antenna (1) and/or relocate the device.
Placing the device near a window enhances the reception quality.
Scanning for DAB radio stations
1
1. Press the button
and (9).
You can also access the menu item "DAB RADIO" directly by pressing the Mode button (3).
2. Press the rotary knob (11) to confirm the selection.
When this mode is called up for the first time or a DAB scan has not yet been performed, the device asks
whether it should start a station scan. Press the rotary knob (11) to start the search.
3. After the station scan has been performed, a list of receivable stations is displayed.
4. Select the desired station using the rotary knob (11).
5. Press the rotary knob (11) to confirm the selection and receive the station.
6. Press the arrow button
New stations are not automatically added to the station list. A new station scan must be performed for this
purpose.
7. To start a new station scan, activate the DAB station scan in the settings menu (see chapter "Settings").
Calling up station information
2
During playback of a station, you can call up further information about this station or the track currently being played
or the time and date.
The information available depends partly on the station's broadcast content. It may take some time for all
contents to become available.
Press the arrow button
50
(8) and select the menu item "DAB RADIO" using the rotary knob (11) or arrow buttons
(9) to return to the station list and select another station.
(9) to display detailed information. Each press of the button switches to the next display.