Settings - Renkforce RF-IR-200 Bedienungsanleitung

n) Settings
Here you will find detailed descriptions of the individual options in the "CONFIGURATION" menu.
1. Press the button
and (9).
2. Press the rotary knob (11) to confirm the selection.
"NETWORK"
1
Here you can add/remove access points (AP) to/from your network and manage them.
• Network options
Always on: Wi-Fi function remains permanently on (faster access)
Auto off in 30s: The Wi-Fi function turns off after 30 seconds of inactivity (to save energy)
• WiFi-channels
Here you can set your country to define the country-specific Wi-Fi radio channels used.
• Add/remove AP
Add AP (Scan): Manual network setup
Add AP (WPS button): Network setup via the router's WPS function
Add AP (SmartConfig): Network setup with a smartphone and associated app
Remove AP: Remove existing network access
• AP: [...]: Display of active network access point with possible change
• Signal: ...dBm: Display of signal strength
• IP [...]: Display/change the IP setting
• DNS [...]: Display/change the DNS setting
Only change the IP and DNS settings if a problem occurs and you know which settings must be changed.
"DATE AND TIME"
2
Here you can make the following settings:
• Select the time zone
• Select time display format
• Select date display format
• Summer and winter time
• Choose between automatic time setting via the network or manual time setting
• Set the time server for automatic time setting
• Automatic time setup via DAB station
• Automatic time setup via FM station
58
(8) and select the menu item "CONFIGURATION" using the rotary knob (11) or arrow buttons