Bluetooth Playback - Renkforce RF-IR-200 Bedienungsanleitung

5. A window opens in which you enter whether the station should be added to the favourites list (Add station...) or
played (Listen to station...).
6. Enter the IP address of the Internet radio in the respective field.
7. Select SEND to carry out the action or CLOSE to cancel it.
8. The page for direct management via your browser opens automatically (see previous chapter)
l) Bluetooth playback
®
Before transmission between your Bluetooth
with each other. This process is called "Pairing".
If a Bluetooth
both devices are within range and Bluetooth
carried out only once. However, this function may have to be activated on your Bluetooth
1. Press the button
and (9).
The menu item "BLUETOOTH" can also be accessed directly by pressing the MODE button (28).
2. Press the rotary knob (11) to confirm the selection.
3. Switch on your Bluetooth
instructions for the corresponding device). Your device will search for available Bluetooth
4. When the Internet radio has been found, its name (RF-IR-200) appears on the display of your Bluetooth
5. Select the name of the Internet radio on your Bluetooth
56
device and the Internet radio is possible, both devices must be paired
®
device is already paired with the Internet radio, pairing is automatically restored as soon as
®
(8) and select the menu item "BLUETOOTH" using the rotary knob (11) or arrow buttons
device with which the Internet radio is to be paired and enable pairing mode (see
®
mode is enabled on the Internet radio, i.e. "pairing" must be
®
device.
®
device.
®
devices.
®
device.
®