4.
Select X-ray intensity.
5.
The values of tube voltage and current are configured automatically according to
the patient's gender/age group and X-ray intensity. Click the UP/DOWN arrow to
adjust kVp and mA. The dose is adjustable by ±1 kVp and ± 0.1 mA respectively.
6.
Click the CONFIRM button when the exposure parameter setting is completed.
7.
Bring the Plaster Cast to the equipment.
Green X (PHT-75CHS) User Manual
6. Acquiring 3D MODEL Scan Images
When you click the CONFIRM button,
The Rotating Unit will move to its initial scanning position.
The Vertical Beam will be activated to make patient
positioning easier.
The DAP (Dose Area Product), Scan Time and Exposure
Time will be displayed below the Scan Information
window.
85