VATECH Green X Handbuch Seite 39

<TMJ Close Mode (LAT/PA)>
The TMJ Close image can be acquired after the TMJ Open image is acquired.
Patient Positioning
1.
"Do you want to capture a TMJ Close image?" message will appear when the
TMJ Open mode is completed. Press/Click OK button to begin TMJ Close mode.
2.
Guide the patient to the equipment.
3.
Guide the patient to place the base of his/her nose (acanthion point) against the
Chinrest and bend the head forward about 5˚.
4.
Let the patient maintain the posture as follows:
Close the mouth.

Place the tongue to the roof of the mouth.

Close the eyes.

Laser Beam Aligning
This is the same as the one for TMJ Open mode.
Finishing Patient Positioning
This is the same as the one for TMJ Open mode.
Green X (PHT-75CHS) User Manual
Steps for TMJ Mode
Patient positioning for TMJ Open > Laser Beam Aligning > X-
ray Exposure > Patient positioning for TMJ Close > Laser
Beam Aligning > X-ray Exposure
Console Software
 As shown in the picture, the support unit of the integrated
Chinrest should touch the patient's acanthion point.
 Let the patient maintain his/her position until the operation
is completed.
3. Acquiring PANO Images
33