Before first use
m
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
Unpack all parts and remove all packaging
materials .
Make sure the delivery contents are complete
and free of damage (Fig . A) . If you find that
parts are missing or damaged, do not use the
product and contact your dealer .
Using an incomplete or damaged product
represents a hazard to people and property .
Before use
Connecting the hose
Fig . B
Align
with the notch in the internal
9 ]
[
vacuum connector
4 ]
[
Push the hose coupler
vacuum connector
[
4 ]
Turn the hose coupler
direction until it is fully engaged .
Check if the hose
6 ]
[
pulling the hose coupler
coupler does not move, the hose is connected
properly .
20 GB/IE
.
fully into the internal
7 ]
[
.
in a clockwise
7 ]
[
is installed properly by
slightly . If the hose
7 ]
[
Disconnecting the hose
Rotate the hose coupler
direction . Pull out the hose coupler .
Connecting the tube
Push the tube
into the hose adapter
[
5 ]
Fixing and removing the
container lid
Fixing the container lid
–
Place the container lid on the metal
container
.
10 ]
[
–
Lock the container lid in place with the
latches
.
[
11 ]
Removing the container lid
–
Undo the latches
–
Lift the container lid off the metal
container
.
[
10 ]
Operation
WARNING! Risk of injury!
m
Before operation, read the instruction manual
u
of the motorised vacuum cleaner you want to
use with the product!
Do not vacuum incandescent materials . Even
u
material that looks as though it has cooled
off on the outside may still be very hot on the
inside . Hot extracted material could be set
alight again in the air current .
Hot ashes should not be purged with water,
u
as the sudden temperature difference can
cause ruptures to the chimney .
Wait at least 24 hours before vacuuming a
u
fireplace to make sure that the fire has gone
out and the ash has cooled down .
in an anti-clockwise
[
7 ]
.
8 ]
[
:
1 ]
[
:
1 ]
[
.
11 ]
[