Cleaning And Care - Parkside PASP 18 A1 Bedienungs- Und Sicherheitshinweise

Inserting the pleated filter
Fig . D
Remove the container lid
container (see „Fixing and removing the
[ 10 ]
container lid") .
Turn over the container lid
side .
Insert the pleated filter
mesh .
13 ] [
Slide the wire mesh
pleated filter over the filter thread
[ 12 ]
Fixing the pleated filter
Hold the pleated filter by the rim . Turn the
pleated filter clockwise . Once the pleated filter
is fixed on the filter thread
mesh in place .
Replacing the pleated filter
m WARNING!
Check the pleated filter
u
damage and deformation . A damaged or
deformed pleated filter cannot be cleaned
and must be replaced . This is necessary to
maintain the functionality of the product and
to protect the product from damage .
Only use replacement filters from Lidl or
u
authorized resellers . Filters that are not
compatible with the product can lead to
injury and product damage .
22 GB/IE
from the metal
1 ] [
and put it to one
[ 1 ]
into the wire
12 ] [
with the inserted
[ 13 ]
.
[ 3 ]
and wire mesh
12 ] [ 13 ] [
, it holds the wire
[ 3 ]
regularly for
[ 12 ]
˜ Cleaning and care
˜ Cleaning
Do not let the pleated filter
contact with water or other liquids .
Always keep the product clean, dry and free
from oil or grease . Remove dust from the
product after each use and before storage .
Regular and proper cleaning will help ensure
safe use and prolong the life of the product . The
best time for cleaning is right after completing
works .
:
Clean the product with a dry cloth .
ATTENTION!
m
Do not use any abrasive, aggressive cleaners,
u
hard brushes, or sharp objects to clean the
product or its accessories . Risk of product
damage .
˜ Maintenance
This product does not contain any parts that can
be repaired by the user . Contact an authorized
service centre or a similarly qualified person to
have it checked and repaired .
come into
12 ] [