Functional Description; Pictograms Regarding The Use Of Nozzles And Ilters; Technical Data - Parkside PNTS 1300 E4 Originalbetriebsanleitung

GB IE NI

Functional description

The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction low is switched off by a loat dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
Pictograms regarding the
use of nozzles and ilters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard loor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Speciic nozzle to vacuum cushions
and mattresses.
Speciic nozzle to clean the car.
Filter to absorb liquids.
Filter not suitable to absorb liquids.
Filter to absorb dry dirt from the
house, garage and workshop.
Filter to absorb ine dust e.g. stone
dust or wood dust.
6
CY

Technical data

Appliance ................ PNTS 1300 E4
Rated voltage U ...220-240 V~, 50/60 Hz
Rated power input
(Power consumption) P ............... 1300 W
Safety class ......................................
Protection category................... IPX4
Suction force ............. 15 kPA (150 mbar)
Mains cable length ........................... 4 m
Waste tank capacity (gross)............... 20 l
Usable container volume (water) ........ 12 l
Weight (incl. all
accessories) ..................... approx. 4.8 kg
* Plug for indoor use only.
Technical and visual modiications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.
II
*