Description Of Operation; Pictograms Regarding The Use Of Nozzles And Filters; Technical Data - Parkside PNTS 1400 E2 Originalbetriebsanleitung

Description of operation

The equipment is fitted with a stable stain-
less steel container to hold liquid and dust.
The steering castors allow for maximum
mobility of the device. For wet vacuuming,
the suction airflow is switched off by a float
when the stainless steel container is full. The
equipment also has a blow function.
To prevent electrostatic charging during
vacuuming, an anti-static chain is fitted on
the bottom of the equipment.
The following describes the function of the
operating parts.
Pictograms regarding the
use of nozzles and filters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard floor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Specific nozzle to vacuum cushions
and mattresses.
Specific nozzle to clean the car.
Filter to absorb liquids.
Filter not suitable to absorb liquids.
Filter to absorb dry dirt from the
house, garage and workshop.
Filter to absorb fine dust e.g. stone
dust or wood dust.

Technical data

Rated voltage ......220-240 V~, 50/60 Hz
Rated power input
(Power consumption) ...................1400 W
Cable length.....................................4 m
Safety class ......................................
Protection category........................... IPX4
Suction force .............17 kPA, (170 mbar)
Stainless steel container capacity
(gross) ................................ approx. 23 l
useful volume ....................... approx. 15 l
Weight (incl. all accessories) ..approx. 6.3 kg
Technical and visual modifications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.
GB
II
49