Configuration; Linkup Configurator App; Sensor Configuration - Veratron LINK UP Serie Bedienungsanleitung

CONFIGURATION

LINKUP CONFIGURATOR APP

To properly configure the system, some
parameters must be calibrated through the Link
Up gateway, like sensor instance and warning
threshold.
This is possible through the "Link Up
Configurator" smartphone App, which can be
downloaded free of charge from the stores of
both Android and iOS devices.

SENSOR CONFIGURATION

LINK UP
CONFIGURATOR
A simple and detailed explanation of the
configuration process is also available as in-app
instructions.
Thanks to the passive embedded NFC receiver,
the Link Up gateway can be configured, as
described below, without the need of power
supply.
1. Launch the "Link Up Configurator" App
and read the actual configuration of the
Link Up device by "tapping" the
smartphone onto the Link Up wireless
area (indicated by the red arrow).
NOTE: The antenna position on the
smartphone depends on the model.
Please refer to the smartphone
manufacturer manual.
CONFIGURATION
B000942