System Installation; Before The Assembly - Veratron LINK UP Serie Bedienungsanleitung

SYSTEM INSTALLATION

• Before beginning, disconnect the negative terminal on the battery, otherwise you risk a short
circuit.
• If the vehicle is supplied by auxiliary batteries, you must also disconnect the negative terminals on
these batteries! Short circuits can cause fires, battery explosions and damages to other electronic
systems. Please note that when you disconnect the battery, all volatile electronic memories lose
their input values and must be reprogrammed.

BEFORE THE ASSEMBLY

1. Before beginning, turn off the ignition and
remove the ignition key. If necessary, remove
the main circuit switch
2. Disconnect the negative terminal on the
battery. Make sure the battery cannot
unintentionally restart.
3. Place the device at least 300 mm away from
any magnetic compass.
WARNING
SYSTEM INSTALLATION
B000942