Supported Linkup Configurations - Veratron LINK UP Serie Bedienungsanleitung

SUPPORTED LINKUP CONFIGURATIONS

Sensor Type
Exhaust
Temperature
* The supported configurations may be updated at any time. Please make sure to always use the latest App
version.
Calibration
Veratron pyrometer sensor
characteristic (fixed)
2. After the readout, the App will show the
"Configuration Summary", which
displays all the current settings of the
device.
To modify the configuration, press the
"Change Configuration" button.
3. Choose the instance (e.g. Engine 2) so
that the Link Up gateway will correctly
transmit the exhaust temperature value
over NMEA 2000®.
Once the settings are completed, press
the "Write Configuration" button to
prepare the download.
4. To download the configuration, simply
"tap" the smartphone again onto the
Link Up wireless area, as described on
step 1.
The configuration is instantaneously
transferred to the device, and the new
"Configuration Summary" is displayed.
Alarm available
Yes
(above)
CONFIGURATION
NMEA 2000® PGN
130316
B000942