Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.3
Hazard symbols
Danger!
This sign indicates an immediate risk of the
death or injury of persons
Crush hazard to limbs
This sign indicates hazardous situations with
a limb crush hazard.
Crush hazard to the whole body!
This sign indicates hazardous situations with
a crush hazard to the whole body.
Risk of injuries due to energy stored in
tensioned springs
This sign indicates hazards caused by energy
stored in the tensioned springs of the torsion
spring shaft.
1.4
Notice and information symbol
NOTICE
NOTICE
... indicates important information (e.g.
material damage), but does not indicate
dangers.
Info!
Information marked with this symbol helps
you to carry out your tasks quickly and safely.
1.5
Refers to text and image
Refers to the graphic of the respective as-
a
sembly step in the picture section of the as-
sembly instructions.
VL: Indicates that the following assembly step
only applies to doors with a front-mounted
torsion spring shaft.
HL: Indicates that the following assembly step
only applies to doors with a rear-mounted tor-
sion spring shaft.
Indicates that the illustration depicted applies
A
for wall mounting.
Indicates that the illustration depicted applies
B
for ceiling mounting.
1.6
Further terms and their meaning
BRB:
width of basic dimension
BRH:
height of basic dimension
20 - EN
2
Safety
Observe the following safety information:
Risk of injury when disregarding the
WARNING
safety information and instructions!
Failure to observe the safety informa-
tion and instructions can cause an elec-
tric shock, fire and / or severe injuries.
•
Following the safety information and
directives given in these assembly
and operating instructions helps to
avoid personal injuries and material
damage while working on and with
the product.
•
Read and comply with all safety in-
formation and instructions.
•
Only use the product for the intended use as
mentioned in these instructions.
•
Keep all safety information and instructions for
future reference.
•
Installation work may only be carried out by
competent person.
•
Never make any modifications or changes to the
product that have not been expressly approved
by the manufacturer.
•
Only use genuine spare parts of the
manufacturer. Incorrect or faulty spare parts can
cause damage, malfunctions or even a total
failure of the product.
•
Failure to comply with the safety information and
directives given in these instructions or with the
accident prevention regulations and general
safety regulations relevant to the field of
application shall exempt the manufacturer or its
representative from all liability and shall render
any damage claims null and void.
2.1
Intended use
The installation of garage doors is intended for
private garages and is to be carried out in areas ac-
cessible for persons. The usage of these garage
doors is to provide safe access for goods and
vehicles in living spaces that are accompanied or
guided by persons.
Garage doors are subject to dangers although they
are tested in accordance with all national and interna-
tional norms and built according to the current state-
of-the-art technology.
The product is compatible with Novoferm products
only.
Never make any modifications or changes to the
product that have not been expressly approved by
the manufacturer.
The product is suitable for domestic use only.
These assembly, operation and maintenance instructions must be kept for the entire period of use!
Werbung
Inhaltsverzeichnis
