Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BLA 50A-001-S115
Balluff Light Array
6
Technical data
6.1
Dimensions
Dimensions of BLA receiver
6.2
Mechanical data
Housing material
Active surface material
Degree of protection per
IEC 60529
Weight
BLA emitter
BLA receiver
Dimensions
(incl. plug-in connection, for
details see section
6.1
Dimensions)
6.3
Electrical data (typical)
Operating voltage Ub
Ripple
No-load current
Digital output
Output current
Output function
Analog output
www.balluff.com
Anodized aluminum
Emitter: Non-reflective
coating glass
Receiver: Interference
filter (glass)
IP 65
375 g
300 g
100 mm x 113 mm x
26 mm
(same for emitter and
receiver)
15 to 30 V DC
< 10 %, max. 2 V
< 100 mA
3 switching outputs
(PNP)
max. 100 mA per
switching output
Differentiation of up to 6
objects (binary coded)
2 outputs; indepen-
dently selectable: 4 to
20 mA or 0 to 10 V
Fig. 6-1:
Dimensions of BLA emitter
Analog signal
LED indicators
Refresh period
Adjustment
Display
Emitter-receiver connection
6.4
Optical data (typical)
Light type
Laser class
Ambient light
Light band width
Max. emitter-receiver distance 2000 mm
Resolution
Smallest object [at standard
emitter-receiver distance] *
1)
Test object: Steel wires
*1)
Selectable:
"rising" or "falling"
1 LED green: Power;
1 LED orange: Object
1.3 ms to 100 ms
(see also note in section
5.3
Info)
4 keys and display on
receiver
OLED; 128 x 64 pixels;
white
4-conductor cable; M12
male to M12 female;
A-coded
LASER; red light 650 nm
1
max. 500 Lux
48.6 mm
0.01 mm
0.3 mm [< 250 mm]
0.5 mm [< 1000 mm]
0.8 mm [< 2000 mm]
english
15
Werbung
Inhaltsverzeichnis
