NSK Primado2 Bedienungsanleitung Seite 8

2-5 Buttons & Icons
Icon Name
Motor Select Button A Selects the Motor which is connected to Motor
Connector A.
If the Motor is not connected, "Disconnection" is
displayed.
Motor Select Button B Selects the Motor which is connected to Motor
Connector B.
If the Motor is not connected, "Disconnection" is
displayed.
Speed Adjustment Area Rotational speed can be adjusted by the Track
Bar and UP/DOWN Button.
Irrrigation Volume
The irrigation volume can be adjusted by the
Adjustment Area Track Bar and UP/DOWN Button.
Irrigation ON/OFF Button Irrigation is OFF by default. Irrigation is turned
ON by touching the button.
Track Bar
The rotational speed or irrigation volume can be
adjusted by moving the Track Bar to the left or
right.
UP Button Increases the rotational speed or irrigation
volume.
DOWN Button Decreases the rotational speed or irrigation
volume.
Rotation Mode Select Button Changes the Rotation Mode of the Motor
connected to Motor A or B between Forward,
Reverse and Oscillate (P200-WPD only).
"Rotating" display Shows that the Motor is rotating.
Priming Button Whether the Irrigation Mode at ON or OFF, as
long as the Priming Button is kept pushed, the
irrigation volume is at 100% capacity.
Foot Control Panel Displays the function set up by the individual
buttons of the Foot Control Panel. If the Foot
Control is not connected, only
Foot Control ON/OFF Button Default setting: OFF. The Foot Control is turned
ON by pressing the button (see Figure above).
Option Set Up Button Displays the "Option Set Up" screen.
Descriptions
is displayed.
7