NSK Primado2 Bedienungsanleitung Seite 29

Error codes Error contents
E11 Error of the
Irrigation Pump.
E12 Error of the
Irrigation Pump.
E13 Error of the Control
Unit.
E14 Error of the Foot
Control.
E15 Error of the Motor
Handpiece.
E16 Error of the Motor
Handpiece.
E17 Error of the Control
Unit.
E18 Error of the Motor
Handpiece.
E19 Error of the Control
Unit.
28
Causes
Foreign substance caught in
the Irrigation Pump.
Failure of the Irrigation Pump
(excessive electric current).
Failure of the internal circuits
of the Control Unit.
Failure of the Irrigation Pump
(excessive voltage).
Failure of the internal circuits
of the Control Unit.
Signal communication
abnormality or failure of the
Display.
Failure of the internal circuits
of the Control Unit.
Poor connection of the Foot
Control.
Failure of the Foot Control.
Failure of the internal circuits
of the Control Unit.
Poor connection of the Motor
Handpiece.
Failure of the Motor Handpiece
(recognition of the Motor
Handpiece).
Failure of the internal circuits
in the Control Unit.
Poor connection of the Motor
Handpiece.
Failure of the Motor Handpiece
(speed of the Motor Handpiece).
Failure of the internal circuits
in the Control Unit.
Abnormality or failure of the
internal memory of the Control
Unit.
Poor connection of the Motor
Handpiece.
Failure of the Motor Handpiece
(Sensor signals).
Failure of the internal circuits
in the Control Unit.
Signal communication
abnormality or failure of the
Display.
Failure of the internal circuits
in the Control Unit.
Checks and measures
Check whether or not any foreign substance is caught in the Irrigation
Pump. If any, remove it. Re-mount the Irrigation Tube. If the Irrigation
Pump works normally, there is no problem.
Turn ON the power source again. If the same error code is displayed, the
Irrigation Pump might be damaged. Contact your dealer for repair of the
Control Unit.
Turn ON the power source again. If the Irrigation Pump works normally,
there is no problem.
Turn ON the power source again. If the same error code is displayed, the
Irrigation Pump might be damaged. Contact your dealer for repair of the
Control Unit.
Turn ON the power source again. If the Irrigation Pump works normally,
there is no problem.
Turn ON the power source again. If the Control Unit works normally,
there is no problem.
Turn ON the power source again. If the Control Unit works normally,
there is no problem.
Re-connect the Foot Control to the Control Unit. If the Foot Control
works normally, there is no problem.
If you have a spare Foot Control, replace the Foot Control with the
spare one to check whether or not the spare one works. If it works, the
original Foot Control is damaged. Contact your dealer for repair.
Turn ON the power source again. If the Foot Control works normally,
there is no problem.
Re-connect the Motor Handpiece to the Control Unit. If the Motor
Handpiece is recognized and displayed normally, there is no problem.
Replace the Motor Handpiece with a spare one to check whether or not
the spare one works normally. If it works normally, the original Motor
Handpiece is damaged. Contact your dealer for repair.
Turn ON the power source to check whether or not the Motor Handpiece
works normally. If it does, there is no problem.
Re-connect the Motor Handpiece to the Control Unit. If the Motor
Handpiece works normally, there is no problem.
Replace the Motor Handpiece with a spare one to check whether or not
the spare one works normally. If it works normally, the original Motor
Handpiece is damaged. Contact your dealer for repair.
Turn ON the power source to check whether or not the Motor Handpiece
works normally. If it does, there is no problem.
Turn ON the power source to check whether or not the Control Unit
works normally. If it does, there is no problem.
Re-connect the Motor Handpiece to the Control Unit. If the Motor
Handpiece works normally, there is no problem.
Replace the Motor Handpiece with a spare one to check whether or not
the spare one works normally. If it works normally, the original Motor
Handpiece is damaged. Contact your dealer for repair.
Turn ON the power source to check whether or not the Control Unit
works normally. If it does, there is no problem.
Turn ON the power source to check whether or not the Control Unit
works normally. If it does, there is no problem.