NSK Primado2 Bedienungsanleitung Seite 25

6-4 Setting Up the Foot Control
1) Touch the Foot Control Set Up Button in the Option Set Up screen to display the Foot Control Set Up screen.
Foot Control Set Up Screen
Multi Foot Control
2) Touch the Foot Control Button (Multi Foot Control: blue, silver and green buttons; Single Foot Control: silver button) which you want to
set up to display the Foot Control Set Up screen. Select the desired functional Button; then, that Button will be assigned to the selected
function, and the Foot Control Set Up screen will be displayed.
Foot Control Set Up Screen
"Foot Control Button" Display
(only for the Multiple Model)
• ON/OFF Select:
The ON/OFF selection of operations by the Foot Control can be set up. Touch the OFF Button to cancel operation by the Foot Control;
the ON/OFF selection itself remains.
• Motor Select:
Switching between the two Motors connected to Motor Connector A and B can be done.
• Speed Select:
The rotational speed of the Motor can be switched from 30% to the default value, then to 100%.
● Beware that previous rotational speed is not stored.
CAUTION
• Rotation Mode Select:
The rotation mode of the Motor can be switched.
• Irrigation ON/OFF Select:
Irrigation can be switched ON/OFF.
• Flush:
Push the Foot Control Button continuously to keep the irrigation at 100% capacity.
• Disable:
Disables function to the Foot Control Button.
• "Foot Control Button" Display (only for the Multi Foot Control):
The Button which is being set up is highlighted.
24
ON/OFF Select
Motor Select
Speed Select
Single Foot Control
Rotation Mode Select
Irrigation ON/OFF select
Flush
Disable
Fig.37
Fig.38