NSK Primado2 Bedienungsanleitung Seite 16

● After having confirmed that the Irrigation Tube
CAUTION
is properly set on the roller, CLOSE the Knob
of the Irrigation Pump. If the Knob is turned to
CLOSE with the Irrigation Tube displaced from
the proper position, the Irrigation Tube might
become damaged (Fig. 13).
● Do not mount the Irrigation Tube in the opposite
direction. The saline solution bottle might burst
if the Control Unit keeps operating with the
Irrigation Tube mounted opposite.
● Prior to inserting the Irrigation Tube into the Irrigation Pump, confirm that there is no foreign substance in the roller
portion. When closing the Pump Cover, do not force the Knob excessively and be careful not to get your fingers caught.
● Only use the Irrigation Tube (Order Code: Y1003915) recommended by NSK. Otherwise, it may cause failure.
3-7 Mounting the Saline Solution
1) Close the Tube Clamp located between the Irrigation Tube Needle and the Irrigation Pump (Fig. 14).
2) Hang a saline solution on the Irrigation Pole, remove the cover of the Irrigation Tube Needle and insert the Needle into the bottle outlet.
(Fig. 15.)
3) Mount an Irrigation Nozzle for the Attachment onto the other end of the Irrigation Tube (Fig. 16).
4) Open the Tube Clamp before operating the Control Unit.
● If the Tube Clamp is opened while the Pump Cover is open, the saline solution might flow out from the end of the
CAUTION
Irrigation Tube. Therefore, prior to opening the Tube Clamp, confirm that the Knob of the Irrigation Pump is in the CLOSE
position.
● If using an Irrigation Tube which is bent or kinked or if operating the Irrigation Pump in a state where the saline solution
cannot flow out of the bottle properly, the Irrigation Tube might become damaged or the Irrigation Tube Needle might
become disconnected from the bottle.
Irrigation Pole
Fig.14
Irrigation Nozzle Irrigation Nozzle
Saline
Solution
Fig.15
Fig.13
Irrigation Tube Irrigation Tube
Fig.16
15