Option Set Up - NSK Primado2 Bedienungsanleitung

6

Option Set Up

It is possible to change the setting of the Control Unit and Motor by setting up the options.
The components which can be set up are as follows:
• Control Unit
• Motor
• Attachment
• Foot Control
1) Touch the Option Set Up Button in the Mini Panel in the HOME
screen to display the Option Set Up screen.
2) Touch the Set Up Button for each component to display the Set Up
screen.
3) Touch the HOME Button or BACK Button to return to the HOME
screen.
Option Set Up Screen
Control Unit Set Up Button
Attachment Set Up Button
● The individual settings made for the Control Unit, Motor and Foot Control in the Option Set Up screen are stored in the
CAUTION
internal memory. Therefore, even after turning OFF the power, the settings will remain.
Exception: the Attachment settings are reset whenever the power is turned OFF or the Motor is disconnected from the
Control Unit. Therefore, prior to use, be sure to confirm the settings of the Attachment.
● If the Motor or the Foot Control is not connected and the Option Set Up is attempted, a message alert will be displayed
announcing that connection is not made.
6-1 Setting the Control Unit
Touch the Control Unit Set Up Button in the Option Set Up screen to display the Control Unit Set Up screen.
Control Unit Set Up Screen
20
BACK Button
Background Brightness
Adjustment Area
Volume Adjustment Area
Language Set Up Button
Motor Set Up Button
Foot Control Set Up Button
HOME Button
Fig.29
Information Button
Fig.30
Option
Set Up
Button
Fig.28