Specifications - Stihl HSE 41 Gebrauchsanleitung

English

Specifications

Motor
HSE 41
Voltage: 230 - 240 V
Rated current: 1.7 A
Frequency: 50 Hz
Power consumption: 400 W
Fuse: min. 10 A
Insulation: II, E
HSE 51
Voltage: 230 - 240 V
Rated current: 1.9 A
Frequency: 50 Hz
Power consumption: 430 W
Fuse: min. 10 A
Insulation: II, E
Cutting blades
HSE 41
Sharpening angle: 36°
Tooth spacing: 21 mm
Stroke rate: 3,400/min
Cutting length: 450 mm
HSE 51
Sharpening angle: 36°
Tooth spacing: 23 mm
Stroke rate: 3,400/min
Cutting length: 500 mm
34
Weight
HSE 41: 2.9 kg
1)
HSE 41 : 3.5 kg
HSE 51: 3.0 kg
1)
HSE 51 : 3.6 kg
1)
Version with 10 meter appliance
cord for UK
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
p
EN 60745-2-15
HSE 41
450 mm blade:
HSE 51
500 mm blade:
Sound power level L to
w
EN 60745-2-15
HSE 41
450 mm blade:
HSE 51
500 mm blade:
Vibration measurement a
EN 60745-2-15
HSE 41
Left handle:
Right handle:
HSE 51
Left handle:
Right handle:
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
to
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
84 dB(A) The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
84 dB(A)
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
95 dB(A)
Observe measures to reduce vibration
exposure to protect the user – see
95 dB(A)
section on "Vibrations" in chapter on
"Safety Precautions and Working
Techniques".
to
hv
2
3.4 m/s
2
2.3 m/s
2
3.3 m/s
2
1.7 m/s
2
HSE 41, HSE 51