Selve Commeo Radio - Selve commeo SEE-com Originalbetriebsanleitung

Information about the motor features

2.3. SELVE commeo radio

All SELVE-com motors receive radio signals on 868.1 MHz.
commeo is a bidirectional radio system that saves data in the receiver as well as the transmit-
ter. All SELVE commeo transmitters can be programmed into these motors. Up to 16 transmit-
ters can be programmed into one motor. Please adhere to the transmitter operating instruc-
tions. The commeo motors can be set for different applications in the CONFIGURATION
mode. The commeo motor SEE-com is already set for 'roller shutters'.
Note: Ensure that the controls are not installed and operated in the vicinity of metal surfaces
or magnetic fields. Metal surfaces or panes of glass with a metallisation within the transmissi-
on path can reduce the range considerably.
Radio sets transmitting at the same frequency could interfere with reception.
It should be noted that the range of the radio signal is restricted by legislation and construc-
tional measures.
34