Safety Instructions - Selve commeo SEE-com Originalbetriebsanleitung

Safety instructions

1. Safety instructions
Important safety notes for installation and operation!
For safety of persons, it is important to observe the instruc-
Warning!
tions, since wrong operation and installation may cause
severe injury. The instructions must be kept.
• Consider the following:
· Relevant laws, standards and instructions
· Country-specific terms
· The specifications of the local energy providers and stipulations for
damp rooms pursuant to VDE 0100
· The safety instructions of DIN EN 60335
· The state of the technology at the time of installation
· This instruction manual and any operating instructions for
connected components
• This motor must only be connected by authorised specialists. For
installation and maintenance the system has to be de-energised.
• For the motor installation, a mains supply circuit break with at least
3 mm contact opening width per pole must be provided (DIN EN
60335). Safety measures against inadvertent activation must be in
place.
• Before installation of the motor, all cables not needed must be re-
moved and any facility that is not required for operation with power
must be put out of operation.
• This instruction manual is part of the device and the warranty con-
ditions. It has to be handed out to the electrician and operator.
28