Functions With One Selected Motor - Selve commeo SE Pro-com Betriebsanleitung

commeo initial operation/setting by radio

6.2. Functions with one selected motor

Transmitter in SELECT mode
If a motor with one transmitter has been selected, the following settings can be made.
In SELECT mode
selected motor
STOP 9 s
STOP 6 s
PROG 1 s
PROG 6 s
PROG 9 s
STOP + PROG 3 s
Automatic setup-mode, deletion and automatic setting of the
end positions
in operation bottom position, top stop/release (see 6.2.1.)
Manual setup-mode, deletion and manual setting of the end
positions
in operation bottom position, top position (see 6.2.2.)
in operation bottom position, top stop/release (see 6.2.3.)
Programming/deleting transmitters (see 6.2.4.)
Transmitter programmed green status LED
Transmitter deleted red status LED
Delete transmitter table in the receiver (see 6.2.5.)
Reset the receiver to the factory setting (see 6.2.6.)
CONFIGURATION mode (only for authorised qualified personnel)
(see 6.2.7.)
42