Functions With One Selected Motor - Selve SE Plus-RC Originalbetriebsanleitung

GB commeo initial operation/Setting by radio

5.2. Functions with one selected motor

Transmitter in SELECT mode
If a motor with one transmitter has been selected, the following settings can be made.
In SELECT mode
selected motor
STOP 9 s
STOP 6 s
PROG 1 s
PROG 6 s
PROG 9 s
STOP + PROG
3 s
Semi-automatic setup-mode, deletion and semi-auto-
matic setting of the upper end position
in operation bottom position, top stop/release
(see 5.2.1.)
Manual setup-mode, deletion and manual setting of
the end positions
in operation bottom position, top stop/release
(see 5.2.2.)
in operation bottom position, top position
(see 5.2.3.)
Programming/deleting transmitters (see 5.2.4.)
Transmitter programmed
Transmitter deleted
Delete transmitter table in the receiver (see 5.2.5.)
Reset the receiver to the factory setting (see 5.2.6.)
CONFIGURATION mode
(only for authorised qualified personnel) (see 5.2.7.)
52
green status LED
red status LED